Inquiries
JPENCN
Products & Solutions

Products & Solutions Top

LIOCREATE™SSNYG SeriesSS NYG Series

Screen ink for nylon cloth (sports bags, sportswear, etc.) and urethane sheets with a flexible film.

Dry curing method Evaporative drying type, 2-component curing type
Packing 1kg
Purpose/Function Displays, nameplates, packages, plastic moldings, insulation
Base material AC, PC, ABS, PVC, untreated PET, treated PET, treated PP, treated PE, painted board, paper, synthetic paper
Base material (other) Nylon cloth (sports bags, sportswear, etc.) and urethane sheets
Printability Leveling properties, curing properties, high speed printing properties
Post-processability Recoatability, punchability
Resistance Heat resistance, hot water-based resistance, weather resistance
Paint film strength Tough coating, flexibility, high elongation, stretchability, bendability
Chemical Resistance Acid resistance, alkali resistance, oil resistance
Electrical properties Insulation
Characteristics (other)
  • It has excellent flexibility, and has good adhesion resistance, rubbing resistance, and abrasion resistance.
  • Good printing suitability (leveling properties).
  • It dries quickly and is suitable for overprinting.
  • Excellent hot water-based and chemical resistance.
Finish, texture, appearance effect mat
setting color 121M red, 141 red, 182 red, 515S vermilion, 219 yellow, 221 yellow, 263 yellow, 037 indigo, 391 indigo, 791 grass B, 821 purple, 611 white, conch 611 white, 911 ink, medium
diluting solvent
  • S-718 solvent (standard)
  • S-719 solvent (slow)
Heat dry curing conditions Room temperature x 15-30 minutes
Auxiliary agents, additives, cleaning solvents, etc. SS Plate Cleaner ECO Series...A plate cleaning agent for screen printing that does not fall under organic regulations or the PRTR law. SD is the standard type, and QD is even faster drying.
How to use ink & precautions Adhesion will vary depending on the degree of water repellency of the nylon material, so for nylon materials with poor adhesion, use the two-component reaction type with SSUR110B additive.
  • Mixing conditions
    Immediately before printing, mix SSUR110B additive at a ratio of 5% to 100% ink, adjust the viscosity to the appropriate level with a diluting solvent, and then print.
  • Pot life (usable time)
    It varies depending on the temperature after mixing the hardening agent, but it takes about 24 hours at room temperature (25℃) in a sealed state. Please check the amount used within the available usage time and adjust only the amount as necessary.
  • Adhesion
    Please note that it will become stable within 5 to 7 days after printing.
  • SS UR110B additive reacts with moisture in the air, so store it tightly closed immediately after use.
  • If foaming occurs during printing, add 0.5 to 1.0% of Additive 500.
Requests for use
  1. This document is an example of our test data, and the properties obtained will vary depending on printing/processing conditions, base materials, etc., and are not guaranteed.
    Before using the product, please carefully check its intended use.
  2. Before handling this product, be sure to read the "Product Safety Data Sheet" and handle with care.
  3. If you wish to export this product overseas, please be sure to check with us.

Print

Inquiries

TOYO INK CO., LTD. Marketing Division Business Planning Department

TEL:+81-3-3272-7693

TOYO INK CO., LTD.