Functional ink series TT118 SS process varnish

A heat sealing agent for laminating a wide range of films such as PET and PVC. Especially suitable for bonding PET base materials. It has a lower Tg than TT198.

Dry curing method	2-component curing type
Packing	15kg
Purpose/Function	adhesive, card, insulation
Base material	AC, PC, ABS, PVC, untreated PET, treated PET, treated PP, treated PE, paper, synthetic paper
Printability	Leveling property
Post-processability	Recoatability, punchability
Paint film appearance	gloss, transparency
Paint film properties	Good adhesion
Resistance	Heat resistance, hot water-based resistance, weather resistance
Paint film strength	Flexibility, bendability
Chemical Resistance	Oil resistance
Electrical properties	Insulation
diluting solvent	S718 solvent
hardening agent	UR240B-50 Varnish
Heat dry curing conditions	45℃-1 hour
Auxiliary agents, additives, cleaning solvents, etc.	SS Plate Cleaner ECO Series...A plate cleaning agent for screen printing that does not fall under organic regulations or the PRTR law. SD is the standard type, and QD is even faster drying.
Printing conditions	Since the resin of the varnish tends to have poor solvent removal, please use a high mesh version (300 mesh version) to make the coating film as thin as possible, and dilute "S718 solvent" by about 50% with a low viscosity ( Dry film thickness: 1~2μm).
How to use ink & precautions	Configuration (example) Hard PVC (white) / TT118SS process varnish / UV offset printing / TT118SS process varnish / PVC film (transparent) 1) Magnetic tape layer and UV offset printing If the adhesion is poor, "UR240B-50 Varnish" contains 10% hardening agent and should be used as a two-component product. The pot life (pot life) after adding a hardening agent is approximately 8 hours at 25℃. 2) The resin used in the varnish tends to have poor solvent removal properties, so the coating film should be made as thin as possible. The high mesh version (300 mesh version) allows you to use "S718 solvent" at a low viscosity when diluted by approximately 50%. (Dry film thickness: 1~2μm). 3) Residual solvent will affect blocking and doubling processing, so please dry thoroughly.
Other product data	Please use aromatic hydrocarbon, ester, or ketone solvents as detergents.
Requests for use	This document is an example of our test data, and the properties obtained will vary depending on printing/processing conditions, base material, etc., so we do not guarantee it. Before using the product, please carefully check its intended use. Before handling this product, be sure to read the "Product Safety Data Sheet" and handle with care. If you wish to export this product overseas, please be sure to check with us.

Inquiries

TOYO INK CO., LTD. Marketing Division Business Planning Department

TEL:+81-3-3272-7693

TOYO INK CO., LTD.